This page is designed to help our clients care for their treatments and services once they are no longer in our care.

If your are experiencing any abnormal side effects from one of our treatments please call 904-527-1728 or email us at IMMEDIATELY.

MCB Lash Extensions Aftercare

  • Do not wet lashes for the first 24 hours.

  • Do not use oil based products, creams or waterproof products.

  • Use only water based makeup and makeup remover.

  • Remove makeup around the eye with a cotton swab.

  • Do not perm, tint or use eyelash curler.

  • Be careful to avoid pulling extensions or running eyes.

  • Please see a trained lash technician to have your lashes professionally removed.

  • To extend the life of your lashes please schedule touch ups every 2-3 weeks.

MCB Brow Wax & Tint Aftercare

  • Do not touch or rub your eyebrows immediately after the treatment.

  • If redness or irritation occurs, apply a cool damp cotton compress to the eye area. If symptoms persist for more than 24 hours, seek medical advice.

  • The effects of the tint will start to diminish within 2-3 weeks as hair grows out and the tint color fades. Strong sunlight/UV light can make the tint color fade faster.

  • Avoid washing your eyebrows, or swimming for 24 hours, as these activities can cause the tint results to fade. Also avoid exfoliating facial cleansers. Those containing AHA's or other chemical exfoliates may decrease the life of your tint. A gentle facial cleanser or eye makeup remover is recommended.

  • Do not apply makeup or brow gel to eyebrows for at least 24 hours after the brow wax or brow tinting treatment.

  • Try to use oil-free facial products around the brow area to prolong the tint color.

  • You can receive the brow tinting treatment every 2 weeks minimum.

  • If you have any questions about your post-care, contact our salon/spa at

MCB Microblading Aftercare

  • Do not wet for 7 days, please wash your face carefully around the eyebrow without getting water on the treated area.

  • No rubbing, no picking. The treated area might feel a little ticklish during the first phase of recovering process, it is important not to rub it as you might get infection into your skin. Peeling is absolutely normal during second phase of recovery; avoid any sort of peeking of dry skin as you might peel out the wrong parts and create bald spots in newly reconstructed brow.

  • Keep your hair away from your face. This means avoid putting your fringe over brows for at least 7 days as this could cause infection.

  • Apply grape seed oil after 7 days of the treatment. Oil usually applied in the evening before sleep, some customer might need to apply it 2 times per day. It will help to keep treated area moisturized and soft for the rest of recovery period. Although, grape seed oil is the most popular and recommended you can substitute it with sweet almond, jojoba or coconut oil. Avoid Petroleum Jelly or Vaseline as it can cause a reaction and block skin from breathing.

  • No sun beds, tanning, excessive sweating in the gym, no makeup or anti-aging creams on the brow area for at least 10 days. It is best to allow the brow to heal first before using any of the above. .

  • Entire healing process will take from 4 to 6 weeks depending on your body’s regeneration, age, immune system and lifestyle. Sometimes after microblading customers develop dry, flaky skin. It is very important not to rub, pick or peel off your flakes or scabs. Itching is absolutely normal as skin is repairing itself. Never rub the treated area as it will disturb the skin from natural healing process. If you get your brow wet at the beginning of recovery, simply dry it with lint free tissue. The way you take care of your new brow after microblading will have great impact on the way it looks. Improper care often results in fading or “patchy” brow.

  • Note that because of natural skin regeneration, after recovery period brows might appear lighter than original. Often, even with proper care, customers develop bald spots or loose original hairstrokes which makes brows look uneven. It is absolutely normal because your natural skin regeneration is not a process that technician can control. That’s why most customers need a touch up after 1 month to assure that brows are perfectly even and desired effect was achieved.

MCB Chemical Peel Aftercare

What to expect

Mild residual redness or mild burning may occur but should resolve over the next 24-72 hours

• You will notice your skin may be slightly reddened and swollen, if a blister appears, call us.

• You will notice your skin will start to flake and peel, it is crucial you do NOT pick or “help” remove the skin as this could lead to scarring and/or pigmentary changes. Apply recommended cream to dry areas. 

• You can begin to see improvements in the treated area within one week of treatment, but will ideally obtain optimal results with a series of 3-6 treatments preformed every 4-6 weeks.

Post Treatment Instructions

No sun exposure for 4 weeks post treatment and you are advised to apply 30+ SPF to treated area to help prevent future hyperpigmentation. 

Day 1

SPF 30 have been applied post procedure. Do not wash your face until following day after chemical peel (Day 2) Do not apply any products with Retin-A, glycolic or Kojic Acid for 1 week post treatment. Avoid sun exposure. 

Day 2 - Day 7 Gently wash face with a facial cleanser, do not use a cleanser containing salicylic or glycolic acid. It is very important to wear a sunblock of SPF 30-50 daily. When in the sun, wear a sun hat and re-apply SPF every 2 hours. You may apply a mineral make-up to treated area as long as there is no break in the skin. 

Day 8 You may resume your normal skin care regimen unless advised by your Aesthetician.

Symptoms requiring medical attention 

Call us if you notice any of the following: Increasing redness or swelling over the treated area, Pustule formation (blistering), Fever

Post-treatment compliance agreement 

The treatment instructions outlined here have been explained to me fully and in great detail and all of my questions have been answered. I agree to wear sunblock as described in these instructions. I understand the importance of following these instructions and know that failure to do so may increase the probability of complications. By signing below, I acknowledge that I have received a copy of these instructions prior to my treatment and agree to comply with them as directed.

MCB Microdermabrasion Aftercare

  • Avoid sun exposure and tanning beds to treated areas after treatment (we recommend this indefinitely). Daily sunscreen with an SPF of at least 30 is vital to maintain your improved skin.

  • Avoid any irritants to your skin, such as any products containing Retin-A, retinol, benzoyl peroxide, glycolic/salicylic acids, astringents or Vitamin C for one week after your treatment.

  • Do not wax, tweeze or use a depilatory to the treated areas for 1 week after your treatment.

  • It you receive Collagen treatments, these may be resumed 24 hours after treatment.

  • If you receive Glycolic Peels, these may be resumed one week after your treatment.

  • If you do not need make-up for the evening of treatment, wait until the next morning.

  • Approximately 48 hours after treatment, your skin may start to peel. This peeling will generally last 2 to 3 days. DO NOT PICK OR PULL THE SKIN.

MCB Dermaplaning Aftercare

  • You may experience slight redness and swelling, which should resolve within 24 hours.

  • Mineral make-up can be worn immediately following treatment.

  • Avoid heat, saunas, hot tubs and sweaty activity for 24 hours; this includes exercise of any kind.

  • Avoid products containing any exfoliating agents (retinoic acid, retinol, tretinoin, retinol, benzoyl peroxide, glycolic acid, salicylic acid, astringents, etc.) for 24 hours after treatment.

  • You may resume your regular skin care routine 24 hours after treatment.